The Ultimate Guide to Using Your 0.68 Caliber Projectile Launcher Home Defense Kit

If you're new to the SABRE Projectile Launcher, welcome to a whole new level of home defense.This launcher combines cutting-edge innovations with an effective and user-friendly design, making it ideal for protecting your home and your loved ones from potential intruders.

In this guide, we’re covering everything you need to know from how to set up and use your pepper projectile launcher, as well as its unique features and safe practices to make the most of your new projectile launcher. Get ready to experience home security like never before.

What's Included in the Kit

Your  SABRE Pepper Projectile Launcher Home Defense Kit comes fully equipped to get you started right out of the box with:

• Two 12-gram CO2 Cartridges: The power source for your launcher.

• 7 0.68 Caliber Pepper Projectiles: For home defense.

• 7 0.68 Caliber Practice Projectiles: Perfect for target practice before the need arises.

• Soft-Sided Case: Handy storage solution to keep your equipment organized.

• Practice Target: To help you practice accuracy for when it counts.

Check out the other accessories for your Projectile Launcher here.

Key Features

The SABRE Pepper Projectile Launcher has been designed with ease of use and accuracy in mind. Let’s look at some of its unique features:

• Front and Rear Fiber Optic Sights: These sights make it easy to line up your shot with precision, even in low light. The red front sight and green rear sight work together for quick targeting.

• Projectile Viewport: Allows you to confirm if there are projectiles loaded in the launcher.

• Rail Mount: Perfect for adding additional accessories.

• Grip Safety: Prevents accidental deployment and ensures that you have complete control.

• Magazine Release: Makes reloading quick and easy.

Setting Up Your Launcher

Setting up your projectile launcher for the first time can seem a bit daunting, but it’s straightforward with the following steps:

1. Load the Magazine and CO2: 

a. Press the magazine release button to remove the magazine.

b. Insert up to seven projectiles into the top of the magazine. They will automatically be held in place by the retainer pin.

c. To load the CO2 cartridge, insert it into the CO2 slot with the small end facing up towards the puncture pin. Twist the flip knob base screw slightly to hold it in place before fully inserting and piercing the cartridge.

2. Adjust the Sights:

a. Using the included hex wrench, loosen the screw located at the center of the rear sight.

b. Slide the rear sight along the scale until you achieve your desired position for a clear sight picture at the range of your choice. Then tighten the screw.

c. When lining up the sights, make sure the front red fiber optic sight is centered within the rear green fiber optic sight. Hold the launcher steady, aiming so that the target rests on top of the front sight.

How to Use Your Launcher

Now that your launcher is set up, here's how to operate it safely and effectively:

1. Engage the Grip Safety: 

a. Hold down the grip safety button located on the back of the launcher’s handle. This safety feature must be engaged before firing.

2. Take Aim 

a. Align your front and rear sights as discussed above.

b. Avoid rapid consecutive shots to maintain optimal velocity and accuracy of each projectile.

3. Fire

a. With the grip safety engaged, gently pull the trigger to fire. Practice using the included practice projectiles to get comfortable with aiming and shooting.

Removing the Magazine and Storing the Launcher

To keep your launcher in best shape, ensure you store it after you’ve finished using it:

1. Remove the Magazine:

a. Push the magazine release button to release the magazine.

b. Slowly twist the flip knob base screw counterclockwise to allow any remaining CO2 to leak out gradually. Ensure no gas remains before removing the cartridge.

c. Check for remaining projectiles in the magazine by pushing down on the projectile release button.

2. Inspect and Store:

a. Always inspect the launcher for any remaining projectiles. Look through the projectile viewport to confirm it’s empty.

b. If storing loaded, ensure the CO2 cartridge is unpunctured to prevent any accidental discharge.

c. Keep out of reach of children, and make sure your launcher is stored in a secure location.

Warranty and Safety

Your SABRE Pepper Projectile Launcher comes with a two-year warranty. To register for warranty, simply scan the QR code provided with the warranty card using any smartphone. It only takes a few minutes and ensures you have access to repair services if needed.

Remember: safety is the top priority when using your home defense kit. Always read the owner's manual for detailed instructions and safety precautions before use.

Tips for New Users

• Practice Regularly: Use the included practice target and projectiles to get used to the launcher. Familiarity will boost your confidence and accuracy in an emergency.

• Regular Maintenance: Check the sights, CO2 cartridge, and projectiles regularly. Make sure all parts are clean and in working order.

• Be Mindful of Your Environment: When practicing, always use safe targets and avoid pointing the launcher at anything you do not intend to shoot.